2022  |  2021  |  2020  |  2019  |  2018  |  2017  |  2016  |  2015  |  2014  |  2013  |  2012

2023 Students

Go to top!

2022 Alumni

Abbi Miller

Device Engineer at Janssen Pharmaceuticals R&D

Allison Coon

Operations Quality Engineer at Baxter

Bahie Ezzat

Ejiroghene Davies-Okarevu

Systems Engineer at Sterling Medical Devices

Hadi Wehbe

Katarina Lichak

Lucas Lassinger

R&D Engineer at Med Dimensions

Mark Truskinovsky

Michael Lee

R&D Associate at Regeneron

Nandita Bhowmik

Associate Clinical Specialist at Medtronic

Rebecca Mathurin

Samuel Maquet

Sophie Mackenzie

Steve Wells

Sylvia Zhong

Theo Couderc

Warish Orko

Associate Product Manager at STERIS


Go to top!

2021 Alumni


Go to top!

2020 Alumni

Nancy Bansbach

Biomedical Flight Controller at NASA’s Johnson Space Center

Jen Beahan

Equipment Engineer – Calibration at GlobalFoundries

Eric Cecco

Development Engineer at Stryker Spine

Sam Charpentier

Product Analysis Engineer at Abbott

Molly Ferris

Associate Project Engineer at Regeneron

Mia Fiacchi

Associate R&D Engineer at DJO

Kale Friesen

Design Assurance Engineer at Boston Scientific

Shannon Keenan

Systems Engineer II at Ortho Clinical Diagnostics

Jacques Kouevi

Vice President, Growth & Innovation at Virtual Mgr

Catherine Krawiec

Associate Project Engineer at Globus Medical

John Lisi

Quality Engineer at Hillrom

Luke McConnaghy

Field Service Engineer at Intuitive

Erin Minervini

Product Engineer at Plexus Corp.

Huy Nguyen

Regulatory Affairs Specialist at Foundation Medicine

Manikanta Nori

Engineer II at CRISPR Therapeutics

Anna Olsen

Quality System Specialist at Hillrom

Kim Richards

Regulatory Associate II at LSI Solutions


Go to top!

2019 Alumni

Ariana Cervantes

Quality Engineer at CONMED Corporation

Elana Chazen

Research Associate at United Therapeutics Corporation

Devon Foggio

Medical Device Engineer, Lens Design, at Bausch + Lomb

Jane Fong

Physical Therapy Intern at Advocate Trinity Hospital

Jennifer Fukagawa

Quality Engineer, Usability and Reliability at NuVasive

Emily Grey

Clinical Account Specialist at Biosense Webster

Gavin Hambrose

Design Engineer at Aesculap

Halie Hotchkiss

Research Technician at Duke University School of Medicine

Christian Keenan

Medical Student at the University of Massachusetts Medical School

Anli Lin

Design Quality Assurance Engineer II at Boston Scientific

Rebecca Macaluso

Biomedical Engineer at Shirley Ryan AbilityLab

Ivy Mannoh

Medical Student at Johns Hopkins University

Alyssa Marzella

Associate Device Development Engineer at Regeneron Pharmaceuticals, Inc.

Huy Nguyen

Regulatory Affairs Specialist at Foundation Medicine

Kwasi Nimako

Associate Sustaining Engineer at Regeneron Pharmaceuticals, Inc.

Brenna Schnell

Engineer at Merck | Center for Packaging & Device Analytics

April Tsang

Risk Management Quality Engineer at Cook Medical

Veronica Valencerina


Go to top!

2018 Alumni

Rebecca Amorese

Quality Engineer at Medtronic

Greg Dadourian

Founder at CompreSure Medical, LLC

Alyssa Lopez

R&D Engineer I at Medline Industries, Inc.

Connor McBride

Test Engineer II at Medtronic

James Melton

Product Development Engineer II at Abiomed

Meghann Meyer

Quality Engineer at Zimmer Biomet

Emily Newman

Sales Consultant, Team Lead at Intellijoint Surgical Inc.

Eric Ravinal

Healthcare Strategy Analyst at Fletcher Spaght Inc.

Justin Schumacher

MD/PhD Student at the University of Maryland’s Medical Scientist Training Program

Joshua Schum-Houck

Clinical Account Manager at Intellijoint Surgical Inc.

Amanda Smith

Quality Engineer at Philips BioTel Care

Raiem Smith

Product Engineer at Zealand Pharma

Evan Sosnow

Clinical Account Specialist at Johnson & Johnson

Vladimir Tokarchuk

Assoc. Field Application Engineer at Panasonic North America Internet-of-Things (IoT)


Go to top!

2017 Alumni

Ian Baranowski

Biomedical Engineer, Medical Device R&D

Resume

Spencer DeCinque

OMS3 Medical Student at Lake Erie College of Osteopathic Medicine

Resume

Kerry Donnelly

Materials Engineer II, Advanced Manufacturing Engineering at Medtronic

Resume

Saadedine El-Homsi

Design Engineer at Centerline Biomedical

Resume

Margaret Ferrari

Graduate Research Assistant at University of Colorado Anschutz Medical Campus

Margaret is interested in the pediatric cardiovascular space and is at the University of Colorado Denver in the Jacot Lab for Pediatric Regenerative Medicine within the Bioengineering Department.   She will be working with two pediatric cardiologists on a tissue engineered vascular graft for…

Brittany Garrison

Product Experience Strategy at Healthgrades

Resume

Bethany Lennox

Biomedical Equipment Support Specialist at the Indian Health Service

Resume

Kyle Meyers

Process Engineer at Boston Scientific

Caeli Quiter

Development Engineer – Research & Development at CooperVision

Lauren Seitz

AME Development Engineer II at Medtronic

Resume

Courage Tsiagbe

Officer 78th Medical Group at Robbins Air Force Base

Resume


Go to top!

2016 Alumni

Martin Gitomer

Design Assurance Engineer at Smith & Nephew

Plans, realizes, and delivers in Systems & Component (HW & SW) level Verification implementation, analysis and reporting. Contributes to documentation generation for Design Verification and Validation (V&V) processes and tools. Supports environmental testing, Standards testing and usability testing. Performs and documents…

Scott Harrienger

Senior Field Clinical Sales Engineer at Abbott

Scott is an Associate Clinical Account Specialist.  Biosense Webster trains employees to become a full Clinical Account Specialist (CAS) within the company.   Once he has completed the training, he will move into a CAS position where he will be responsible for providing clinical product…

Erica Marron

Portfolio Manager at Stryker Spine

Kayleigh Miller

Neurophysiologist at NuVasive

Neurophysiologist with Nuvasive Clinical Services providing intra-operative monitoring during various surgeries. Monitor patients’ nervous system in various surgeries using a wide range of neurophysiological techniques across many testing modalities including SSEP, S-EMG, T-EMG, TceMEP and TOF Interact with surgeons and…

Shwe Pyie

Validation Engineer at PSC BioTech

• Worked on full lifecycle validation for computerized systems, lab and manufacturing equipment• Prepared validation documents (VP, URS, FS, IQ/OQ/PQ, TM & VSR) • Performed the execution of written protocols • Investigate root cause problems from data trend and generate…

Tristan Richardson

Supervisor, Drug Product Engineering at Thermo Fisher Scientific

Since August 2017 I have led all validation activities at the AMRI Burlington site. This has allowed me to gain an understanding and experience in a wide range of validation including equipment and facility qualification, cleaning validation, process simulations, computer…

Angela Ryck

Medical Student at Tufts University School of Medicine

Danielle Wilson

Senior Development Engineer I at Zimmer Biomet

Contract Development Engineer with Adecco at Zimmer Biomet. Responsibiliries include reviewing documentation in Trauma Orthopaedic design controls,performing engineering analysis to determine products failure modes and verify the product withstand those failure mode, and update documentation for verification in existing design…

Andrew Zeccola

Senior System Engineer at Medtronic

As part of the Mechanical Circulatory Support group at Medtronic I work with system, subsystem, and lower-level requirement documents in order to drive designs of future devices as well as driving design changes to existing products already on the market.Also,…


Go to top!

2015 Alumni

Lisa Benison

System Engineer at Ortho Clinical Diagnostics

Lisa is currently within the R&D Functional Performance group at Ortho Clinical Diagnostics as a Systems Engineer in Rochester. Lisa Benison was the first the recipient of the Medtech Association’s first Engineering World Health (EWH) Summer Institute scholarship.  EWH is a non-profit organization, founded…

Deborah Cooper

Product Applications Development Engineer at Transonic Systems Inc

As Product Applications Development Engineer, she interfaces between R&D and early adopters of the technology to develop and champion new standards of diagnosis and care. She support these clinicians in the ICU, OR, and Catherization Lab with technical, educational, and…

Nathan Couper

R&D Engineer at Thermo Fisher Scientific

Nathan started as a project engineer responsible for leading contract product development services at FTT. As a member of the FTT Medical division, there is a strong emphasis on medical device development and design for manufacturing, where applicable projects range…

Jayne Elizabeth Gavrity

Device Engineer at AstraZeneca

Jayne works as part of the research department within the Advanced Surgical Devices unit of Smith & Nephew.  Our focus is on FEA and mechanical testing of hip, knee, and trauma devices and instruments. As a research engineer it is…

Laura Hobbs, MD

Clinician, General Surgery University of Maryland

Laura started off as a Process Engineer that supported contact lens design and developmentthrough data analysis, coordinating product testing, technical report writing, and general project team support at Bausch & Lomb in Rochester, NY.  She is currently in Medical School…

Courtney Kodweis, DO

Clinician, Family Medicine URMC

Courtney is currently a medical student  at the Edward Via College of Osteopathic Medicine.  Courtney started at Materialise USA where she worked with surgeons to help them plan their surgical cases using 3D modeling software. For each case, she created…

Chad Pickering

Sr. R&D Engineer for Surgical Innovations at Medtronic

Chad works started as a Product Development Engineer II at Smith & Nephew Advanced Surgical Devices (ASD) in Andover, MA.     This group was acquired by Medtronic, where he now serves as a R&D Engineer  His position also involves: 1)…

Kierstan Ryan

CMC Regulatory Sciences Specialist at Regeneron Pharmaceuticals, Inc.

Assists the Commercial Products team with maintaining regulatory filings in US and ex-US countries. Assists with completing regulatory filings for approval in ex-US countries. Assists with the completion of amendments to commercially approved regulatory filings.

Megan Stockdill

Senior Analyst, Strategic Initiatives, Competitive & Market Strategy at Johnson & Johnson

As a R&D Product Development Engineer, Trauma, Megan assists with the design anddevelopment and improvement and modifications to current products. She works with product managers, design engineers, surgeons, manufacturing, regulatory affairs, and other team members to develop product requirements and concepts on…

Benjamin Vespone

Senior Electrical Engineer at Ximedica

Ben currently works as an Associate Biomedical Engineer at Ximedica in Providence, RI. • Firmware design for a pair of battery powered, handheld medical devices. Features include: closed loop motor control, Bluetooth low energy (BLE), I2C protocol, coulomb counter, capacitive…

Qinglong Liu

Senior R&D Engineer at Ethicon Endo Surgery

Qinglong completed his M.S. in Materials Science at University of Rochester.  His main responsibility is as a design engineer for arthroscopic  surgeries of the shoulder and knee. 

Jonathan Stone, M.D., M.S.

Clinical Director, CMTI

Jonathan J. Stone, MD, MSe is a faculty member in the Departments of Neurosurgery, Neurology & Biomedical Engineering and the Director of Surgical Innovation at the University of Rochester Medical Center. Dr. Stone's clinical interests are in peripheral nerve surgery,…


Go to top!

2014 Alumni

Matthew Crilley

Quality Assurance Engineer at Quotient Sciences

Martech specializes primarily in manufacturing extruded tubing and injection-molded components for final assembly catheters used for hemodialysis applications.  The Quality Engineering group deals with solving quality issues in the company's product line resulting from customer complaints and during new product development.  Martech is run by the same management and therefore works very closely with Medical…

Ryan DeAngelis

Clinical Trial Manager at Massachusetts General Hospital

As a Field Clinical Studies Engineer with Biotronik, I work with our study sites in the greater New York area. These include pre-market and post-approval as well as after-market studies. During the start-up process I will screen potential sites for…

Jessica Indyk

Product Development Engineer at DePuy Synthes

Formerly a Research Sr Engineer I at Zimmer Biomet

Erin Keegan

Combination Product Policy Analyst at theFDA

Lead Reviewer for the Neurostimulaton Devices Branch of the Division of Neurological and Physical Medicine Devices within the Office of Device Evaluation. Review pre-marketing submissions for a variety of device specialities and clinical presentations related to neurology. Assemble teams of…

W. Spencer Klubben

Senior Product Manager at Foundation Medicine

Spencer is currently a Business Development Manager for Versalume and Corning Incorporated.  He leads the creation of new medical businesses inside fortune 500 and startup companies.  He leads cross functional teams to bridge the gap between customer needs and products….

Mohammad Musleh

Medical Device Engineer III, Lens Design Group at Bausch + Lomb

Mohammad is working at Bausch & Lomb as a Development Engineer in the lens design group. The lens design group is involved in all aspects of product life cycle of the medical device, from designing and developing the contact lenses to…


Go to top!

2013 Alumni

Alvin Lomibao

Assistant Dean, Hajim School of Engineering & Applied Sciences

As Assistant Director for Undergraduate Programs, Alvin collects and analyzes data for the purpose of identifying processefficiencies and implementing process improvement plans.  He will also develop “best practice” processes and procedures for  monitoring and measuring the status, performance and outcomes…


Go to top!

2012 Alumni

Rachel Rakvica

Global Product Strategy, Neurosurgery at BK Medical

• Lead team of 9 engineers to align priorities, and create plans to meet business objectives.  • Provide technical and risk management guidance for decision making to support ongoing manufacturing activities.  • Assist with planning of future projects, budgeting, and…

Nicole Varble, PhD

Research Scientist at Phillips

Her background includes in vitro models of the arm vasculature and arteriovenous fistulas for hemodiaysis accessand biomedical device design.  She is currently assisting in the development of an integrated clinical tool which aids physicians by providing detailed hemodynamic profiles of unruptured aneurysms. Computational Fluid…


 

 

2022  |  2021  |  2020  |  2019  |  2018  |  2017  |  2016  |  2015  |  2014  |  2013  |  2012

2023 Students

Go to top!

2022 Alumni

Abbi Miller

Device Engineer at Janssen Pharmaceuticals R&D

Allison Coon

Operations Quality Engineer at Baxter

Bahie Ezzat

Ejiroghene Davies-Okarevu

Systems Engineer at Sterling Medical Devices

Hadi Wehbe

Katarina Lichak

Lucas Lassinger

R&D Engineer at Med Dimensions

Mark Truskinovsky

Michael Lee

R&D Associate at Regeneron

Nandita Bhowmik

Associate Clinical Specialist at Medtronic

Rebecca Mathurin

Samuel Maquet

Sophie Mackenzie

Steve Wells

Sylvia Zhong

Theo Couderc

Warish Orko

Associate Product Manager at STERIS


Go to top!

2021 Alumni


Go to top!

2020 Alumni

Nancy Bansbach

Biomedical Flight Controller at NASA’s Johnson Space Center

Jen Beahan

Equipment Engineer – Calibration at GlobalFoundries

Eric Cecco

Development Engineer at Stryker Spine

Sam Charpentier

Product Analysis Engineer at Abbott

Molly Ferris

Associate Project Engineer at Regeneron

Mia Fiacchi

Associate R&D Engineer at DJO

Kale Friesen

Design Assurance Engineer at Boston Scientific

Shannon Keenan

Systems Engineer II at Ortho Clinical Diagnostics

Jacques Kouevi

Vice President, Growth & Innovation at Virtual Mgr

Catherine Krawiec

Associate Project Engineer at Globus Medical

John Lisi

Quality Engineer at Hillrom

Luke McConnaghy

Field Service Engineer at Intuitive

Erin Minervini

Product Engineer at Plexus Corp.

Huy Nguyen

Regulatory Affairs Specialist at Foundation Medicine

Manikanta Nori

Engineer II at CRISPR Therapeutics

Anna Olsen

Quality System Specialist at Hillrom

Kim Richards

Regulatory Associate II at LSI Solutions


Go to top!

2019 Alumni

Ariana Cervantes

Quality Engineer at CONMED Corporation

Elana Chazen

Research Associate at United Therapeutics Corporation

Devon Foggio

Medical Device Engineer, Lens Design, at Bausch + Lomb

Jane Fong

Physical Therapy Intern at Advocate Trinity Hospital

Jennifer Fukagawa

Quality Engineer, Usability and Reliability at NuVasive

Emily Grey

Clinical Account Specialist at Biosense Webster

Gavin Hambrose

Design Engineer at Aesculap

Halie Hotchkiss

Research Technician at Duke University School of Medicine

Christian Keenan

Medical Student at the University of Massachusetts Medical School

Anli Lin

Design Quality Assurance Engineer II at Boston Scientific

Rebecca Macaluso

Biomedical Engineer at Shirley Ryan AbilityLab

Ivy Mannoh

Medical Student at Johns Hopkins University

Alyssa Marzella

Associate Device Development Engineer at Regeneron Pharmaceuticals, Inc.

Huy Nguyen

Regulatory Affairs Specialist at Foundation Medicine

Kwasi Nimako

Associate Sustaining Engineer at Regeneron Pharmaceuticals, Inc.

Brenna Schnell

Engineer at Merck | Center for Packaging & Device Analytics

April Tsang

Risk Management Quality Engineer at Cook Medical

Veronica Valencerina


Go to top!

2018 Alumni

Rebecca Amorese

Quality Engineer at Medtronic

Greg Dadourian

Founder at CompreSure Medical, LLC

Alyssa Lopez

R&D Engineer I at Medline Industries, Inc.

Connor McBride

Test Engineer II at Medtronic

James Melton

Product Development Engineer II at Abiomed

Meghann Meyer

Quality Engineer at Zimmer Biomet

Emily Newman

Sales Consultant, Team Lead at Intellijoint Surgical Inc.

Eric Ravinal

Healthcare Strategy Analyst at Fletcher Spaght Inc.

Justin Schumacher

MD/PhD Student at the University of Maryland’s Medical Scientist Training Program

Joshua Schum-Houck

Clinical Account Manager at Intellijoint Surgical Inc.

Amanda Smith

Quality Engineer at Philips BioTel Care

Raiem Smith

Product Engineer at Zealand Pharma

Evan Sosnow

Clinical Account Specialist at Johnson & Johnson

Vladimir Tokarchuk

Assoc. Field Application Engineer at Panasonic North America Internet-of-Things (IoT)


Go to top!

2017 Alumni

Ian Baranowski

Biomedical Engineer, Medical Device R&D

Resume

Spencer DeCinque

OMS3 Medical Student at Lake Erie College of Osteopathic Medicine

Resume

Kerry Donnelly

Materials Engineer II, Advanced Manufacturing Engineering at Medtronic

Resume

Saadedine El-Homsi

Design Engineer at Centerline Biomedical

Resume

Margaret Ferrari

Graduate Research Assistant at University of Colorado Anschutz Medical Campus

Margaret is interested in the pediatric cardiovascular space and is at the University of Colorado Denver in the Jacot Lab for Pediatric Regenerative Medicine within the Bioengineering Department.   She will be working with two pediatric cardiologists on a tissue engineered vascular graft for…

Brittany Garrison

Product Experience Strategy at Healthgrades

Resume

Bethany Lennox

Biomedical Equipment Support Specialist at the Indian Health Service

Resume

Kyle Meyers

Process Engineer at Boston Scientific

Caeli Quiter

Development Engineer – Research & Development at CooperVision

Lauren Seitz

AME Development Engineer II at Medtronic

Resume

Courage Tsiagbe

Officer 78th Medical Group at Robbins Air Force Base

Resume


Go to top!

2016 Alumni

Martin Gitomer

Design Assurance Engineer at Smith & Nephew

Plans, realizes, and delivers in Systems & Component (HW & SW) level Verification implementation, analysis and reporting. Contributes to documentation generation for Design Verification and Validation (V&V) processes and tools. Supports environmental testing, Standards testing and usability testing. Performs and documents…

Scott Harrienger

Senior Field Clinical Sales Engineer at Abbott

Scott is an Associate Clinical Account Specialist.  Biosense Webster trains employees to become a full Clinical Account Specialist (CAS) within the company.   Once he has completed the training, he will move into a CAS position where he will be responsible for providing clinical product…

Erica Marron

Portfolio Manager at Stryker Spine

Kayleigh Miller

Neurophysiologist at NuVasive

Neurophysiologist with Nuvasive Clinical Services providing intra-operative monitoring during various surgeries. Monitor patients’ nervous system in various surgeries using a wide range of neurophysiological techniques across many testing modalities including SSEP, S-EMG, T-EMG, TceMEP and TOF Interact with surgeons and…

Shwe Pyie

Validation Engineer at PSC BioTech

• Worked on full lifecycle validation for computerized systems, lab and manufacturing equipment• Prepared validation documents (VP, URS, FS, IQ/OQ/PQ, TM & VSR) • Performed the execution of written protocols • Investigate root cause problems from data trend and generate…

Tristan Richardson

Supervisor, Drug Product Engineering at Thermo Fisher Scientific

Since August 2017 I have led all validation activities at the AMRI Burlington site. This has allowed me to gain an understanding and experience in a wide range of validation including equipment and facility qualification, cleaning validation, process simulations, computer…

Angela Ryck

Medical Student at Tufts University School of Medicine

Danielle Wilson

Senior Development Engineer I at Zimmer Biomet

Contract Development Engineer with Adecco at Zimmer Biomet. Responsibiliries include reviewing documentation in Trauma Orthopaedic design controls,performing engineering analysis to determine products failure modes and verify the product withstand those failure mode, and update documentation for verification in existing design…

Andrew Zeccola

Senior System Engineer at Medtronic

As part of the Mechanical Circulatory Support group at Medtronic I work with system, subsystem, and lower-level requirement documents in order to drive designs of future devices as well as driving design changes to existing products already on the market.Also,…


Go to top!

2015 Alumni

Lisa Benison

System Engineer at Ortho Clinical Diagnostics

Lisa is currently within the R&D Functional Performance group at Ortho Clinical Diagnostics as a Systems Engineer in Rochester. Lisa Benison was the first the recipient of the Medtech Association’s first Engineering World Health (EWH) Summer Institute scholarship.  EWH is a non-profit organization, founded…

Deborah Cooper

Product Applications Development Engineer at Transonic Systems Inc

As Product Applications Development Engineer, she interfaces between R&D and early adopters of the technology to develop and champion new standards of diagnosis and care. She support these clinicians in the ICU, OR, and Catherization Lab with technical, educational, and…

Nathan Couper

R&D Engineer at Thermo Fisher Scientific

Nathan started as a project engineer responsible for leading contract product development services at FTT. As a member of the FTT Medical division, there is a strong emphasis on medical device development and design for manufacturing, where applicable projects range…

Jayne Elizabeth Gavrity

Device Engineer at AstraZeneca

Jayne works as part of the research department within the Advanced Surgical Devices unit of Smith & Nephew.  Our focus is on FEA and mechanical testing of hip, knee, and trauma devices and instruments. As a research engineer it is…

Laura Hobbs, MD

Clinician, General Surgery University of Maryland

Laura started off as a Process Engineer that supported contact lens design and developmentthrough data analysis, coordinating product testing, technical report writing, and general project team support at Bausch & Lomb in Rochester, NY.  She is currently in Medical School…

Courtney Kodweis, DO

Clinician, Family Medicine URMC

Courtney is currently a medical student  at the Edward Via College of Osteopathic Medicine.  Courtney started at Materialise USA where she worked with surgeons to help them plan their surgical cases using 3D modeling software. For each case, she created…

Chad Pickering

Sr. R&D Engineer for Surgical Innovations at Medtronic

Chad works started as a Product Development Engineer II at Smith & Nephew Advanced Surgical Devices (ASD) in Andover, MA.     This group was acquired by Medtronic, where he now serves as a R&D Engineer  His position also involves: 1)…

Kierstan Ryan

CMC Regulatory Sciences Specialist at Regeneron Pharmaceuticals, Inc.

Assists the Commercial Products team with maintaining regulatory filings in US and ex-US countries. Assists with completing regulatory filings for approval in ex-US countries. Assists with the completion of amendments to commercially approved regulatory filings.

Megan Stockdill

Senior Analyst, Strategic Initiatives, Competitive & Market Strategy at Johnson & Johnson

As a R&D Product Development Engineer, Trauma, Megan assists with the design anddevelopment and improvement and modifications to current products. She works with product managers, design engineers, surgeons, manufacturing, regulatory affairs, and other team members to develop product requirements and concepts on…

Benjamin Vespone

Senior Electrical Engineer at Ximedica

Ben currently works as an Associate Biomedical Engineer at Ximedica in Providence, RI. • Firmware design for a pair of battery powered, handheld medical devices. Features include: closed loop motor control, Bluetooth low energy (BLE), I2C protocol, coulomb counter, capacitive…

Qinglong Liu

Senior R&D Engineer at Ethicon Endo Surgery

Qinglong completed his M.S. in Materials Science at University of Rochester.  His main responsibility is as a design engineer for arthroscopic  surgeries of the shoulder and knee. 

Jonathan Stone, M.D., M.S.

Clinical Director, CMTI

Jonathan J. Stone, MD, MSe is a faculty member in the Departments of Neurosurgery, Neurology & Biomedical Engineering and the Director of Surgical Innovation at the University of Rochester Medical Center. Dr. Stone's clinical interests are in peripheral nerve surgery,…


Go to top!

2014 Alumni

Matthew Crilley

Quality Assurance Engineer at Quotient Sciences

Martech specializes primarily in manufacturing extruded tubing and injection-molded components for final assembly catheters used for hemodialysis applications.  The Quality Engineering group deals with solving quality issues in the company's product line resulting from customer complaints and during new product development.  Martech is run by the same management and therefore works very closely with Medical…

Ryan DeAngelis

Clinical Trial Manager at Massachusetts General Hospital

As a Field Clinical Studies Engineer with Biotronik, I work with our study sites in the greater New York area. These include pre-market and post-approval as well as after-market studies. During the start-up process I will screen potential sites for…

Jessica Indyk

Product Development Engineer at DePuy Synthes

Formerly a Research Sr Engineer I at Zimmer Biomet

Erin Keegan

Combination Product Policy Analyst at theFDA

Lead Reviewer for the Neurostimulaton Devices Branch of the Division of Neurological and Physical Medicine Devices within the Office of Device Evaluation. Review pre-marketing submissions for a variety of device specialities and clinical presentations related to neurology. Assemble teams of…

W. Spencer Klubben

Senior Product Manager at Foundation Medicine

Spencer is currently a Business Development Manager for Versalume and Corning Incorporated.  He leads the creation of new medical businesses inside fortune 500 and startup companies.  He leads cross functional teams to bridge the gap between customer needs and products….

Mohammad Musleh

Medical Device Engineer III, Lens Design Group at Bausch + Lomb

Mohammad is working at Bausch & Lomb as a Development Engineer in the lens design group. The lens design group is involved in all aspects of product life cycle of the medical device, from designing and developing the contact lenses to…


Go to top!

2013 Alumni

Alvin Lomibao

Assistant Dean, Hajim School of Engineering & Applied Sciences

As Assistant Director for Undergraduate Programs, Alvin collects and analyzes data for the purpose of identifying processefficiencies and implementing process improvement plans.  He will also develop “best practice” processes and procedures for  monitoring and measuring the status, performance and outcomes…


Go to top!

2012 Alumni

Rachel Rakvica

Global Product Strategy, Neurosurgery at BK Medical

• Lead team of 9 engineers to align priorities, and create plans to meet business objectives.  • Provide technical and risk management guidance for decision making to support ongoing manufacturing activities.  • Assist with planning of future projects, budgeting, and…

Nicole Varble, PhD

Research Scientist at Phillips

Her background includes in vitro models of the arm vasculature and arteriovenous fistulas for hemodiaysis accessand biomedical device design.  She is currently assisting in the development of an integrated clinical tool which aids physicians by providing detailed hemodynamic profiles of unruptured aneurysms. Computational Fluid…


 

Powered by Nirvana & WordPress.